Prebuilt Circular Spinneret Array - 10 outlets

This circular spinneret array is made from solid stainless steel plates and permits up to (10) needles to be configured to dispense simultaneously.

The array consists of (10) equally spaced output fittings on a 34mm (1.34 inch) circle. The dimension of the array body (with no fittings) is 56mm in diameter (2.20 inch) by 15.25mm high (0.60 inch).

The array can easily be disassembled for cleaning.

The kit includes the 2-piece stainless steel body, (10) male Luer fittings for the output ports, (1) female Luer fitting for the inlet port, (11) neoprene sealing washers, (1) Viton O-ring (installed), (10) spare O-rings, (5) bolts and washers (used to seal the two body parts together), and (1) Allen key for securing the two halves of the array body together.

This item is prebuilt and in stock. Needles are available but sold separately. 

Additional and spare male and female Luer fittings can be found here. 

Additional and spare black sealing washers can be found here.

For stainless steel dispensing needles, go here.

For custom-length stainless steel dispensing needles, go here.

For stainless steel needles with plastic hubs, go here.

For polypropylene tips, go here.

If you need something special, please contact us.